Scm SUPERSET NT C 6

Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Strip recovery unit 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - motor power 5,5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit placed before the planer shaft Tandem feed group in front of the right vertical with rapid exclusion Feed groups after the upper ones for the reduction of the towing distance from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Preparation for integration in line with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at the entrance - piece counting Independent electrical panel POS. 1 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET tool quick clamping -allows the locking/unlocking of tools with the simple use of a compressed air gun POS. 2 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with useful length 180 mm T-SET tool quick clamping Electronic vertical positioning POS. 3 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with useful length 180 mm T-SET tool quick clamping Electronic horizontal positioning POS. 4 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET tool quick clamping Electronic vertical positioning POS. 5 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET tool quick clamping POS. 6 Glass bead recovery unit Comprehends: PRL allows automatic transition from planing to function recovery of the glass stopper and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - outgoing tandem and modified hood second advance group after universal